Advertisement
Quick Links
Model
GP7124A-4000
Updated 07/23
Contents:
Pump Specifi cations:
Installation Instructions:
Exploded View:
Parts List:
Kits:
Torque Specifi cations:
Recommended
Spare Parts List:
Repair & Service:
Dimensions:
Warranty Information:
Triplex Ceramic
Plunger Pump
Operating Instructions/
Repair and Service Manual
page 2
page 3
page 4
page 5
page 6
page 6
page 6
pages 7
back page
back page
Advertisement
Related Manuals for Giant GP7124A-4000
Summary of Contents for Giant GP7124A-4000
- Page 1 Triplex Ceramic Model Plunger Pump Operating Instructions/ Repair and Service Manual GP7124A-4000 Contents: Pump Specifi cations: page 2 Installation Instructions: page 3 Exploded View: page 4 Parts List: page 5 Kits: page 6 Torque Specifi cations: page 6 Recommended Spare Parts List: page 6 Repair &...
- Page 2 • Filling quantity: • Quality: Industrial gear oil ISO VG 220 or automotive gear oil SAE 90 GL4 - Giant’s p/n 01154 • Intervals: First oil change after 50 operating hours then every 1000 operating hours, but at the latest 12 months...
-
Page 3: Installation/Putting Into Operation
6. Installation/Putting into 7. Operation The maximum operating pressure can be used in Operation the speed range of 750 RPM. When reducing the speed, the pump pressure must be reduced in 6.1 Shaft protector the same proportion to ensure suffi cient gearbox When the pump is in operation, the open shaft lubrication. - Page 4 Exploded View - GP7124A-4000...
- Page 5 GP7124A-4000 PARTS LIST ITEM PART DESCRIPTION QTY. ITEM PART DESCRIPTION QTY. 05769 Crankcase 07169 Leakage Seal 05525 Head for Oil Dipstick 06758 Spacer Disc 01009 O-Ring 05524 Circlip 13000 Oil Filler Plug Assembly 13159 Stud Bolt 07601 Crankcase Cover 13160...
- Page 6 GP7124A-4000 REPAIR KITS Inlet Valve Assembly Kit #09702 Plunger Packing Kit #09224A Item Part # Description Qty. Item Part # Description Qty. 05193 O-Ring 38B 06750 Leakage Gasket 05194 Inlet Valve Seat 38C 06667 O-Ring 06761 Valve Plate 39A 07150...
-
Page 7: Maintenance And Servicing
Tighten nuts (49A) to the required torque. against the spacer pipe (51F) when the pump is being turned. If required, supplementary assembly instructions can be requested from Giant Remove seal sleeve (38) together with the Industries. plunger (36) from the crankcase guides (use ring groove as an aid). - Page 8 Liability under this warranty is on all non-wear parts and limited to the replacement or repair of those products returned freight prepaid to Giant Industries which are deemed to be defective due to workmanship or failure of material. A Returned Goods Authorization (R.G.A.) number and completed warranty evaluation form is required prior to the return to Giant Industries of all products under warranty consideration.