Table of Contents
Advertisement
46/52
Troubleshooting
Bosch Rexroth AG, A2FM/A2FE Series 70, RE 91071-01-B/03.2015
14 Troubleshooting
Table 13 can help you with troubleshooting. This table is not exhaustive.
Issues may occur in practice that are not listed here.
Only authorized personnel may perform troubleshooting inside a safety area
designated by the machine manufacturer.
14.1 How to proceed for troubleshooting
▶
Troubleshoot with reduced operating parameters when possible.
▶
Proceed is a systematic and purposeful manner, even when pressed for time.
Random and indiscriminate removal could result in the inability to determine the
original cause of a fault.
▶
First obtain a general overview of how your product works in conjunction with the
entire system.
▶
Try to find out whether the product was working properly in conjunction with the
entire system before the fault occurred.
▶
Try to determine any changes to the entire system in which the product is installed:
– Were there any changes to the product's operating conditions or operating range?
– Has maintenance work recently been carried out? Is there an inspection or
maintenance log?
– Have any changes (e.g., upgrades) or repairs been made to the overall system
(machine/system, electrics, control) or to the product? If yes, which?
– Has the hydraulic fluid been changed?
– Has the product or machine been used as intended?
– How did the malfunction appear?
▶
Try to get a clear idea of the cause of the fault. Directly ask the (machine) operator.
▶
Document the work carried out.
▶
If you cannot rectify the fault, contact one of the contact addresses which can be
found at: www.boschrexroth.com/addresses.
Advertisement
Table of Contents
