The Hartke Model LH5210 and LH5410 bass amplifiers offer classic tone with Hartke's newest breakthrough in bass
speaker design; Hydrive hybrid cone transducers.
•
Power to spare — The model LH5210 delivers 350 watts to its internal 8 ohm speaker system or 500 watts when
an 8 ohm extension cabinet is connect along with the internal speaker. The Model LH5410 produces a full 500
watts delivered to its internal 4 ohm speaker system.
•
Classic 12AX7 tube high-voltage preamp circuit provides great tone.
•
BASS, MID and TREBLE "Tone Stack" equalizer controls, allow you to create a broad range of tonal colors for your
bass instrument.
•
A built-in Limiter which not only adds real "loudness" to your bass sound, but also allows you to smooth out
volume differences between notes.
•
Two independent inputs to accommodate both passive and active bass guitars.
•
The model 5210 has a rear panel 1/4-inch connector for connecting an external extension cabinet.
•
Protection relay circuitry that protects connected speakers from dangerous overloading and also prevents
"thumps" when powering on or off.
•
Effect loop send and return jacks that allow you to connect to professional outboard effects processors.
•
Electronically balanced direct output that provides a means of routing signal to professional mixing consoles in
both live performance and recording environments.
•
The LH amplifiers' cabinets are constructed using high quality plywood with extensive bracing and dado joinery,
making them extremely rigid and at the same time lightweight.
•
The vinyl covering, metal grill, corners and handles, plus removable casters provide added protection and ease
while moving the amplifier from gig to gig.
•
Rugged construction makes the Model LH5210 and LH5410 eminently road-worthy.
•
Easy to use, great tone and loud!
•
Three year extended warranty.
3
Features