SA-M-12.16.2.2
Fig. 9: Electrical connection of 12gang switch actuator MDRC
5.4
Mounting / dismantling
The device is a rail mounting device for installing in distributors for easy installation on 35
■
mm mounting rails according to DIN EN 60 715.
The device can be mounted in any position.
■
The adhesive label is to be removed and glued into the list (see system manual System
■
Access Point).
The bus connection is established by means of the enclosed bus connection terminal.
■
The device is ready for operation after the bus voltage has been applied.
■
The description of the terminals is located on the housing.
■
Access to the device must be guaranteed for operation, testing, inspection, for maintenance
■
and repairs according to DIN VDE 0100-520.
Product manual 2CKA001473B5406
Connection, installation / mounting
│19