Maintenance; Filter Replacement Indicators - dafi Flow Comfort DC10 Lead Manual

Maintenance

• On a regular basis, check whether the system is leakproof and the hoses are not bent. If bent, the
hoses must be immediately replaced.
• Do not use aggressive cleaning agents, abrasive substances or cleaning solutions.

Filter Replacement Indicators

The integrated indicator (faucets: VITO, HERO)
The independent indicator (faucets: COMO, KYOTO ALTO, ALTO+)
*DOES NOT REFER TO DC1 AND DC10 LEAD FILTERS.
Manual for the independent filter cartridge replacement indicator
LED - Diode signaling
filter wear status
HRD - Button for setting
level of hardness WATER
A, B, C, D*
LED SIZE/HRD - signaling
diode of type of cartridge
and hardness level water*
RESET - Button to reset
and activation of work
indicator
SIZE - Button for setting
the type of filter used
LED - Filter cartridge
type indicator
signaling diode
LED -
HARD -
water hardness*
CHECK/RESET:
postponing the blinking
-
- blinking/beeping for 12 hours
- RESET
SIZE -
the type of filter used
9
button to set the
button for setting