Table of Contents
Advertisement
Specification
• The compact construction of the filter allows for perfect optimization of tap water by reducing the
content of lead, chlorine and undesirable substances. The use of the Flow Comfort filtration system
improves the taste of drinking water. Water becomes clear and suitable for direct con sumption. The
elements of the system are adjusted for installation in a cabinet under the sink. The efficiency and
durability of the filter depend on the local properties of water as well as on the condition of the water
installation.
• The filter bed has been developed based on a high-quality activated carbon of natural origin. It is
possible that carbon particles might appear in the water. They are completely safe for health. If
swallowed, they will cause no harm to health. The construction of the filtration system uses ma terials
approved for contact with food.
• The Flow Comfort system includes an independent or integrated electronic indicator which reminds
the user about the need to replace the filter.
Safety of use - important information
• The tap water filtration system can be connected to the cold drinking water connection. Do not use for
water that has not been analyzed for suitability for consumption.
• A shut-off valve should be installed before the filter.
• If water pressure is higher than the nominal value, a pressure-reducing valve must be installed.
• Certain groups of people e.g., people with kidney diseases or weak immune system should con sult the
possibility and method of use of the filter with a specialist and/or a physician.
• It is recommended that the filtration system should not be left unused for a longer period of time. If the
system is not used for 2-3 days, flush it with 0.52 gallon of water. If the system is going to be used for
the first time after a month or longer, flush it with 5.2 gallons of water.
• Filtered water remains suitable for consumption for 1-2 days (depending on the storage con ditions).
• Due to the risk of secondary pollutants in the water installation, the system has been qualified as
category 2 acc. to EN 1717.
• The DC10 Lead filter cartridge and the head must be protected against overheating and exces sive
exposure to sun.
• A factory-packed D10 Lead filter cartridge is fit for use for 5 years from the date of manufacture.
Technical details of the filtration system
Working pressure
Maximum working pressure (if higher, use a pressure-reducing valve)
Temperature of feed water
Ambient temperature during storage and transport
Water flow
Dimensions of the filter with the head and the wall bracket
Position of installation
Water connection - inlet and outlet
Pressure in the water installation
3
11.6 - 87 PSI
116 PSI
39.2°F (4°C) to 86°F (30°C)
5°F to 104°F
0.8 US gal/min (gpm)
1.1 US gal/min (gpm)
1.2 US gal/min (gpm)
4,3 x 4,3 x 11,4 inch
Vertical
¼ '' (6.3 mm) hose
29 PSI
44 PSI
58 PSI
Advertisement
Table of Contents
