Basic Operations; Basic Settings - RadioLink AT9SPro Quick Start Manual

Basic Operations

For normal functions, short press the PUSH button to confirm, but when modifying the
Note ：
"MODEL SEL" and "MODE TYPE", long press the PUSH button for 1 second to confirm.

Aileron/Elevator/Throttle/Rudder Stick controls 1 to 4 channels by default. Set STK-MODE
in PARAMETER menu. If you set the STK-MODE to "-" and then the AUX-CH in BASIC
MENU, you can assign other switches to control channel 1 to channel 4.

Two VR knob switches and two VR slider switches on the back meet the needs of pan/tilt
control, and the functions of these switches can be customized.

AT9S Pro has 4 two-way switches, 3 three-way switches and a reset switch. Function of all
switches can be customized. For details, please refer to the detailed manual of AT9S Pro
www.radiolink.com/at9spro_manual.

Basic Settings

1. Language Settings: Long press the MODE button to enter the
menu, if the language is displayed as Chinese, please rotate the
PUSH button to move the cursor to PARAMETER(系统设置), short
press the PUSH button to enter the setting interface, and change
the language from Chinese (语言选择:简体) to English.
2. Alarm Settings: The low voltage alarm of the transmitter,
receiver, model battery and RSSI(Received Signal Strength
Indicator) alarm can be customized on AT9S Pro. The factory lo w
4