Packing And Moving; Installation - Jocel JF239 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

PACKING AND MOVING

Before unpacking the product, memorize the position of each accessory, in case you must pack it
again in the future.
Do not lift or pull the door or the door handle during transport. When moving, the device cannot
be tilted more than 45 degrees (the angle with respect to the vertical direction). Please avoid
strong vibrations and blows to the device as they could affect its operation.
Do not place the good horizontally or upside down.

INSTALLATION

The refrigerator must be placed on a completely flat surface, leave between 5 and 10 cm
between each side of the appliance and the wall, and leave 30 cm between the top of the
appliance and the ceiling. An incorrect location could increase the noise of the device.
Choose a place that is not exposed to sunlight, high temperature or humidity, since moisture
can cause stains.
REMOVE the lower panel before installation.
The appliance can be adjusted by rolling its two legs in when it is unstable. Rolling clockwise
REFRIGERATOR DOORS
The side to which the refrigerator door opens can be altered on the right side to the left, if the place
of installation so requires.
WARNING: In case of changing the door, make sure that the appliance is completely
turned off and disconnected from the power supply.
Remove all the bottle racks from the door top revent them from being damageded.
38

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jf239i

Table of Contents