Status Output - Ebyte E104-BT53C3 User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd
Parameters The value contains 6 characters, ranging from 0 to 9. The default value is 123456
The single connection is valid. Authentication is required after reconnection.
After the mobile phone and other devices are connected to the module, this command can be sent through
description the configuration channel. After the successful return, all AT commands can be used through the
This command only supports the use of mobile APP; This instruction must be capitalized.
example
6.3.26 The APP configures the authentication password
Command
Inquire
Setting AT+UP_AUTH =[para]
parameters
Description
Example

6.3.27 Status output

Inquire
Setting
Parameters
description
Example
Copyright ©2012–2020，Chengdu Ebyte Electronic Technology Co.,Ltd
APP configuration authentication
AT+UP_AUTH？
The value is a fixed length of 6. The default value is 123456.
Effective immediately, power off save;
Only serial port configuration is supported.
Example Query the air configuration authentication
Change the air configuration authentication password
Command
AT+LOGMSG?
AT+LOGMSG =[para]
1: Status display enabled (default)
Take effect immediately. Save power failure.
Query the current status output function
configuration channel.
Instruction: AT+AUTH=123456
Return: +0K
Instruction: AT+UP_AUTH?
Return: +0K=123456
Command: AT+UP_AUTH=392578
Return: +OK
0: The status display is off
Instruction: AT+LOGMSG?
Return: +OK=1
Set output to off state
Instruction: AT+LOGMSG=0
Return: +OK
E104-BT53C3 Manual User
+ERR=[NUM]：Error
Reply
+ UP_AUTH =[para]
+OK：Success
+ERR=[NUM]：error
reply
+ OK =[para]
+OK：success
+ERR=[NUM]：error
28