Chengdu Ebyte Electronic Technology Co.,Ltd
In AT command mode, if BLE data is RECEIVED, the system displays the prefix +RECEIVED:, the
first parameter is the handle value, the second parameter is the length of the received data,
and 1234567890 is the received data. If it is in transparent mode, the data is printed
directly.
The APP configuration completion setting function is not supported. The APP configuration
completion setting function is not supported.
The connection handle is 1, the data sending (ASCII) is ABCED, and the input timeout is 5000ms
Example
6.3.16 Displays connected devices
Inquire
Prameters
This command is used with AT+TRM_HANDLE. For example, AT+TRM_HANDLE=1 indicates that the
Description
primary role sends transparent data to a device whose handle is 1 and MAC address is
The handle value followed by the letter P indicates that the connection is the primary device
Example
6.3.17 Disconnect
Setting
Parameters
para1: current role, 0: single slave role, 1: single master role, 2: master slave role
Copyright ©2012–2020,Chengdu Ebyte Electronic Technology Co.,Ltd
The module receives BLE data in AT instruction mode
Command
AT+CONNECT_LIST?
para2: MAC address of the remote device
Valid in master, master and slave mode;
(mobile phone or primary role module) in the secondary role.
Command
AT+DISCON=[para1],[para2]
Command: AT+SEND=1,5,5000
Back:
+OK
INPUT BLE DATA:10
+ RECEIVED: 1, 10
BLE DATA
1234567890
+ CONNECT_LIST =[para1],[para2]
para1: Connects the handle
With immediate effect;
2C:11:65:22:B0:F1.
Displays connected devices
Command: AT+CONNECT_LIST?
Back:
+CNT_LIST=
1P,2C:11:65:22:B0:F1
2, 2 C: but 5:22: AD: 59
E104-BT53C3 Manual User
Reply
Reply
+OK:Success
+ERR=[NUM]:Error
22