Plantronics Blackwire C420 Quick Setup Manual page 2

Making and Receiving Calls
To MAKE a call:
To call an existing contact, click on the
contact (1), drag (2) and drop it (3) onto the
Cisco window.
You can also enter a phone number manually
using the search box located at the top of the
main Lync window (4). After you enter the
number, drag (5) and drop the number onto
the Cisco window (6).
When a call is placed, a call window will
open (7), and the audio will be routed to your
headset.
To END a call:
To end a call, use the controls on your
headset or press the red phone icon in the
call window (8).
To RECEIVE a call:
When you receive a call, a notification window
will appear on your computer screen (9).
To answer the call, use the controls on your
headset or click the phone icon in the call
notification window (10).
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Blackwire and C420 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other
countries. Microsoft and Lync are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Published 10.11
with Cisco Unified Communications Integration for Microsoft Lync
1
2
3
4
5
8
6
9
7
10
0