Plantronics Blackwire C435 Quick Setup Manual

Blackwire C435
®
Welcome:
Using a Plantronics Blackwire headset
for PC calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer's internal microphone
and speaker.
C
B
A
Control Functions:

A. Mute Microphone

B. Volume Adjust

C. Call Answer/End

Blackwire C435 Key Features:

Convertible headset provides mono
or stereo wearing options

Wideband offers the best PC audio
available

Dynamic EQ stereo automatically
adjusts for voice and multimedia use

Noise-canceling microphone filters
out background noise

Rugged, collapsible design easily
go
stows for use on-the-
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Blackwire and C435 are trademarks or registered trademarks of Plantronics, Inc. Cisco is a registered trademark of Cisco Systems Inc. and/or its affiliates in the U.S. and other
countries. Published 07.11
Quick Setup Guide
™
Getting started:
Follow the steps below to get call answer/end controls
with your Blackwire headset and Cisco® Unified
Communications Integration for Cisco WebEx
Connect™.
1. Connect your headset to the computer. If this
is the first time you are connecting, wait for
the installation process to complete.
2. To get call control features, please download
the latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Cisco Unified Communications Integration
for Cisco WebEx Connect to always route call audio to
the headset:
3. Click Edit in the upper left corner of the Cisco
WebEx Connect main screen.
4. Then select Settings.
5. Next choose Audio/Video.
6. Select your Plantronics headset in the drop
down for both Speakers and Microphone.
7. You can also adjust the Speakers and
Microphone volume in this screen.
8. When you are finished, select Save.
Note: USB configuration settings are unique for each USB
port. If you connect the headset to a different port you
will need to make these changes again to set behavior
for that USB port.
3
4
5
8
6
6