Plantronics Blackwire C435 Quick Setup Manual

Blackwire C435
®
Welcome:
Using a Plantronics Blackwire headset
for PC calls will deliver a simpler, more
comfortable and better sounding audio
experience than you could get using just
your computer's internal microphone
and speaker.
C
B
A
Control Functions:

A. Mute Microphone

B. Volume Adjust

C. Call Answer/End

Blackwire C435 Key Features:

Convertible headset provides mono
or stereo wearing options

Wideband offers the best PC audio
available

Dynamic EQ stereo automatically
adjusts for voice and multimedia use

Noise-canceling microphone filters
out background noise

Rugged, collapsible design easily
go
stows for use on-the-
©2011 Plantronics, Inc. All rights reserved, Plantronics, the logo design, Blackwire and C435 are trademarks or registered trademarks of Plantronics, Inc. Avaya one-X is a trademark of Avaya Inc. Published 07.11
Quick Setup Guide
™
Getting started:
Follow the steps below to get call answer/end controls
with your Blackwire headset and Avaya one-X®
Communicator.
1. Connect your headset to the computer. If this
is the first time you are connecting, wait for
the installation process to complete.
2. To get call control features, please download
the latest version of Plantronics software at
plantronics.com/software.
Note: Check with your IT staff before installing
software on your computer.
Configuring Avaya one-X Communicator to always
route call audio to the headset:
3. Click the Menu icon in the Avaya one-X
Communicator main screen.
4. Select Settings, then General Settings.
5. Next choose Audio.
6. Click Audio Tuning Wizard.
7. Select your Plantronics headset as the default
device for both Playback and Recording. Click
Next.
8. In these next screens, you can test and adjust
volume, recording level, and identify
background noise for optimal noise
cancellation.
9. When adjustments are complete, select
Finish.
Note: USB configuration settings are unique for each USB
port. If you connect the headset to a different port you will
need to make these changes again to set behavior for that
USB port.
3
4
5
6
6
7
6
7