Dual Handle Interlock; Discharge Chute Rotation Lever; Discharge Chute Deflector Lever; Scraper Blade - Ariens Sno-Thro Compact 24 Operator's Manual

DUAL HANDLE INTERLOCK

Allows auger / impeller to rotate without
holding attachment clutch lever continuously.
Auger continues to turn until both clutch
levers are released.
DISCHARGE CHUTE ROTATION
LEVER
See Figure 10.
Rotates discharge chute left or right to control
snow discharge.
205°
Figure 10
DISCHARGE CHUTE DEFLECTOR
LEVER
See Figure 11.
Moves discharge deflector up or down to
control height of snow discharge.
Figure 11

SCRAPER BLADE

Contacts the surface being cleared and
protects the housing from damage during
normal use.

SKID SHOE

Controls the distance between the scraper
blade and the surface.

AXLE LOCK PIN

Models 920021, 920024
Engages or disengages wheels with axle
rotation, allowing for wheel drive or
freewheeling. See Set Axle Lock Pin on
page 12.
HEIGHT ADJUSTMENT LEVER
(RIGHT SIDE)
Model 920022
See Figure 12.
Raises or lowers auger housing for various
snow-clearing situations.

OPERATION

WARNING: AVOID INJURY.
Read and understand the Safety
section before proceeding.
IMPORTANT: All references to left, right, front
or rear are given from the perspective of
operator in operator's position, facing the
direction of forward travel.

EMERGENCY STOPPING

1. Release both clutch levers.
2. Turn engine key to stop position and
remove key.
3. Wait for all moving parts to stop before
leaving operator's position.
EN - 10
Figure 12