Checking The Engine Oil Level - Toro 37779 Operator's Manual

5. Align the holes in the nested ends of the rods and
insert 2 carriage bolts (in the loose parts bag) through
the short rod from the left side of the machine (from
the operating position).
6. Insert the cable clip that supports the deflector cable
onto the forward carriage bolt, and secure the carriage
bolts with locknuts from the loose parts bag
11).
1. Cable clip
7. Hold the blue trigger cap down and rotate the Quick
Stick in a circle to ensure that the chute and deflector
operate smoothly.
5

Checking the Engine Oil Level

No Parts Required
Procedure
Your machine comes with oil in the engine crankcase.
g018885
Figure 10
Figure 11
2. Deflector cable
Note: Before starting the engine, check the oil level and
add oil if necessary.
Use automotive detergent oil with an API service classification
of SF, SG, SH, SJ, SL, or higher. Refer to your engine owner's
manual.
Use Figure 12
outdoor temperature range expected:
g019049
(Figure
Engine Oil Capacities
Model
37779
37780
1. Remove the dipstick and slowly pour oil into the oil
fill tube to raise the oil level to the Full mark on the
dipstick. Do not overfill.
9
below to select the best oil viscosity for the
Figure 12
Engine Oil Capacity
0.50 L (17 oz)
0.70 L (24 oz)
(Figure
Figure 13
13).