Stihl MS 192 T Instruction Manual page 19

Place the cap on the opening and
N
rotate it counterclockwise until it
engages the filler neck.
Continue rotating the cap
N
counterclockwise (about a quarter
turn) – this causes the bottom of the
cap to be turned to the correct
position.
Turn and lock the cap clockwise –
N
see sections on "Closing" and
"Checking security of cap".
Tank cap with markings and symbols
Opening
Raise the grip until it is upright.
N
MS 192 T, MS 192 TC
Turn the cap counterclockwise
N
(about a quarter turn).
Marks on tank cap and fuel tank must
line up.
Remove the cap.
N
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank.
STIHL recommends you use the STIHL
filler nozzle for fuel (special accessory).
Fill up with fuel.
N
Closing
Grip must be vertical:
Fit the cap – marks on tank cap and
N
fuel tank must line up.
Press the cap down as far as stop.
N
While holding the cap depressed,
N
turn it clockwise until it engages in
position.
The marks on the tank cap and fuel tank
are then in alignment.
English
17