Determining Which Temperature Control You Are Using - Daikin ETSH12P50EF User Reference Manual

5 | Operation

5.6.3 Determining which temperature control you are using

User reference guide
28
1 Go to [4.2]: Space heating/cooling > Operation mode
schedule.
2 Select a month.
3 For each month, select an option:
▪ Reversible: Not restricted
▪ Heating only: Restricted
▪ Cooling only: Restricted
4 Confirm the changes.
Example: Changeover restrictions
During cold season.
Example: October, November, December, January,
February and March.
During warm season.
Example: June, July and August.
In-between.
Example: April, May and September.
To determine which temperature control you are using (method 1)
Check the installer settings table filled in by the installer.
To determine which temperature control you are using (method 2)
You can see on the home screen which temperature control you are using.
a2
b
a1
a1 Heat emitter of the main zone (in this example Underfloor heating)
a2 Heat emitter of the additional zone (in this example Radiator). If no icon is
displayed, there is no additional zone.
b Room thermostat type of the main zone:
If b=...
No icon
When
18 Feb 2018
55
45
1.6
21
bar
35
Then the temperature control is...
Main zone
Room thermostat control External room thermostat
External room thermostat
control
Leaving water
temperature control
Restriction
Heating only
Cooling only
Reversible
22:19
6
Additional zone (if any)
control
Leaving water
temperature control
ETSH/X(B)12P30+50EF
Daikin Altherma 3 H MT ECH₂O
4P663480-1A – 2022.07