Baxi Lite Compact LC550 Installation And Service Manual page 33

3.2 General recommendations
The appliances must be installed by a certified professional in accordance with prevailing
statutory texts and codes of practice. The installation must comply on all points with
prevailing regulations and directives, which govern work and interventions in individual
homes, blocks of flats and other buildings
3.3 Installation Instruction
In a bathroom, do not install this product in Volumes V0 and V1 (see Fig.2).
If the water heater is installed above habitable premises, provide a storage tank with
outflow to the drains
① This electrical water heater shall be installed on a solid wall. If the strength of the
wall cannot bear the load equal to two times of the total weight of the heater filled fully
with water, it is then necessary to install a special support. In case of hollow bricks wall,
fill with cement concrete completely.
② After selecting a proper location, determine the positions of the two install holes used
for expansion bolts with hook. Drill two holes in the wall with the corresponding depth by
using a chopping bit with the size matching the expansion bolts attached with the
machine, insert the screws, make the hook upwards, tighten the nuts to fix firmly, and
then hang the electrical water heater on it (see Fig.3).
Fig.2
33