RAID Array – This option will display information about each RAID array hosted by the HBA. Highlight the target
device and press the Enter key to view details about the configuration.
4.2. Using the Rocket Series HBA UEFI (UEFI HII)
Note
:
After setting 'UEFI Setting', if there is no 'HighPoint RAID Management Utility' option in the
motherboard BIOS, the motherboard does not support UEFI HII, please replace the other two methods.
4.2.1 UEFI Setting Utility
The Rocket UEFI utility is an interface that provides management commands and controller related settings. After
installing the RAID controller and powering on the system, the RAID controller UEFI should post during the system's
boot procedure.
Different motherboards will provide different UEFI settings. Please consult your motherboard's user manual for more
information.
Set UEFI setting with SuperMicro X11DPi-NT motherboard as an example.
1.
Set "Boot Mode Select" to "Dual"
12