SMC Networks SMC7908VoWBRA Configuration Manual page 2

SMC7908VoWBRA/B
SMC7908VoWBRA/B SMC7908VoWBRA/B
6. If your VoIP provider was not listed in Step 4, manually input
the SIP Domain, Realm, Proxy Address, Proxy Port, Registrar
Address and Registrar Port provided. Otherwise skip this Step.
7. Select the preferred Codec from the "Selected Codecs" list.
The "Up" and "Down" buttons are used to change the Codec
priority. The preferred Codec goes at the top. Click "Save
Settings" button to save configuration.
SMC7908 VoWB RA SMC7908 SMC7908 V V oWB
8. Click submenu "VoIP Extensions" and select your country from the "Telephony Tone Country Setting" drop down list.
Click "Save Settings" button to save configuration.
9. The basic setup is now complete. Click submenu "VoIP Status and Call logs" to verify the SIP registration status.
If registration status is "Success" you are ready to make phone calls. If registration status is "Fail" check the following:
• Check the Internet connection is working.
• Check you have entered your VoIP configuration settings correctly.
• Contact your VoIP service provider to verify your configuration settings are correct and to verify their Server is
working.
For troubleshooting tips refer to the troubleshooting section in the Manual and QIG. For detailed information on configurable
settings refer to the Manual.
oWB R R A A