Utility Configuration - SMC Networks SMC2862W-G EZ Connect User Manual

U C
TILITY ONFIGURATION
When the utility program is running, there will be a [quick launch]
icon in the lower right-hand corner of the taskbar. The icon will be
GREEN if you have a good connection to a wireless network. If it
is red, you will need to verify the network settings and check to
be sure that the Wireless Access Point on your network is turned
on. You may also need to re-position the Access Point and place
it in a higher position so that you are able to gain more wireless
signal strength.
Double-click the [quick launch] icon in the system tray to bring up
the Configuration Utility. This provides quick access to management
statistics and adapter settings.
The Configuration Utility includes the following tabs:
[Configuration]
Allows you to implement [Profile Management], edit [SSID data],
change the [Tx Rate] and [Operating mode], and enable
[64/128-bit WEP].
[Link Information]
Allows you to view/monitor [network status], [throughput], [wireless
channel], and [TCP/IP Information].
[IP Information]
Displays [TCP/IP data] and allows you to [Release and Renew
your IP addresses].
19