Troubleshooting - EINHELL 10.022.61 Original Operating Instructions

10. Troubleshooting

If the equipment is operated properly you should experience no problems with malfunctions or faults.
In the event of any malfunctions or faults, please check the following before you contact your customer
services.
Fault
Equipment does not
charge up
Anl_CC_BC_15_M_SPK1.indb 16 Anl_CC_BC_15_M_SPK1.indb 16
GB
Possible cause
- Charger clamps connected incor-
rectly
- Contact between the charger
clamps
- Battery defective
- 16 -
Remedy
- Connect the red clamp to the posi-
tive pole and the back clamp to the
bodywork
- Prevent contact
- Have the battery checked by an
expert and replace it if necessary
05.08.2016 09:54:01 05.08.2016 09:54:01