Motorola ASTRO APX 1000 Series Quick Reference Card page 2

Sending an Emergency Call
1
Press the Emergency button.
2
Press and hold the PTT button. Speak clearly
into the microphone.
3
Release the PTT button to end call.
4
Press and hold Emergency button to exit
emergency.
To exit emergency at any time, press and hold
the Emergency button.
Sending a Silent Emergency Call
1
Press the Emergency button.
2
The display does not change; the LED does
not light up, and there is no tone.
3
Silent emergency continues until you:
Press and hold the Emergency button to exit
emergency state.
OR
Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.
To exit emergency at any time, press and hold
the Emergency button.
English
Display Status Icons
u
Receiving a call or data
t
Transmitting a call or data
8
Blinks when the battery is low.
The more stripes, the stronger the
V
signal strength for the current site
(trunking only).
Direct radio to radio communication or
O
connected through a repeater.
On = Direct
Off = Repeater
M
This channel is being monitored.
H .
L = Radio is set at Low power.
OR H = Radio is set at High power.
i
Scanning a scan list.
Blinking dot = Detects activity on the
Priority-One Channel
j
during scan.
Steady dot = Detects activity on the
Priority-Two Channel
during scan.
k
The vote scan feature is enabled.
n
On = User is currently associated with
the radio.
Off = User is currently not associated
with the radio.
Blinking = Device registration or user
registration with the server failed due
to an invalid username or pin.
o
Data activity is present.
MFK is in Mode Change feature.
MFK is in Volume Change feature.
On = Secure operation.
m
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.