"Remove the hinge cover" on page 41
"Remove the strip cover" on page 42
Step 1.
Remove the two pieces of removable tape with tweezers and then remove the LCD panel.
Note: The removable tape is not reusable. Replace it when replacing related FRUs.
Figure 29. Remove the LCD panel
Step 2.
Peel off the tape and then detach the touch board connector.
Figure 30. Detach the touch board connector
Step 3.
Turn over the LCD panel and peel off the EDP connector absorber and then detach the EDP cable
from the LCD panel.
.
Chapter 4
Removing a FRU or CRU
43