Inserting The Batteries In The Remote Control; Remote Control Range - ohmex HET 4530 COLOR Instruction Manual

HET 4530 COLOR
> > Inserting the batteries in the remote control
The appliance is equipped with a remote control.
To insert or replace the batteries:
1. Remove the battery slot cover from the remote control rear part.
2. Insert the batteries (AAA 1,5V type).
RESPECT THE POLARITIES!
3. Reposition the battery slot cover.
If the remote control is not operated for prolonged periods of time, the
batteries will discharge and the remote control won't work; in this case,
replace the batteries with the new ones.
The remote control batteries must not be exposed to excessive heat such like
sun rays, flames or similar.
> > Remote control range
Do not submit the remote control to strong vibrations or shocks.
Store the remote control away from moisture and water.
If the remote control doesn't work after replacing the batteries, remove and
reinsert the batteries after waiting about 5 minutes.
USE
EN
105