Fellowes Pulsar+ 300 Manual page 4

ENGLISH
STEPS TO BIND
1
1. Punch front and back covers
first.
CORRECTING A BOUND DOCUMENT
Additional sheets may be included or removed at any time by opening and then closing the comb as previously described.
REMOVAL OF WASTE CLIPPINGS
The waste tray is located under the machine and is accessed from the right side. For best results empty the tray regularly.
STORAGE
Lower the punch handle to the horizontal position. Lower the lid. The Pulsar comb binder is designed to be stored horizontally on the desktop.
4
2
Front
Cover
Max 17
30
(80gsm)
(20 lb)
Back
Cover
2. Punch sheets in small
batches that do not overload
the machine or the user.
3
3. Load punched sheets directly
onto the opened comb. Starting
with the front of the document.
4
4. When all punched sheets are
loaded onto the comb, push the
comb lever backwards to close
the comb and remove the bound
document.