Samsung WA85GWG User Manual page 11

REMAINING TIME,
8
DELAY START TIME,
ERROR DISPLAY
SOAK BUTTON
9
LAST SETTING
10
BUTTON
DELAY START
11
BUTTON
SOIL LEVEL
12
BUTTON
WATER LEVEL
13
BUTTON
WATER SUPPLY
14
BUTTON
WA85GWWIP-03222A-03_EN.indd Sec3:11 WA85GWWIP-03222A-03_EN.indd Sec3:11
The display shows the remaining wash time, the reserved delayed start
time or error messages.
Press this button to perform a soak wash.
You can set the soak time from between 10 to 60 minutes.
This function cannot be selected during a Wool and Clean tub program.
Last setting button.
Selects this course to load the settings for the last course.Perform a wash
course using the last used settings without having to enter them manually
again. Your choices are automatically saved when you press the Start/
Pause button. To use a memorized course, press the Last Settings button
and then press the Start/Pause button.
Press this button to fi nish the wash at a specifi ed time. Turn your washer off
to cancel a previously delayed start time.
You can set the delayed start time from between 3 to 19 hours.
You can select the water stream type.
Heavy  Normal  Light  Off  Heavy
You can change the setting depending on the course.
You cannot change the setting during a spin cycle.
The water level is automatically adjusted. However, you can select the
water level manually by repeatedly pressing this button.
Press this button repeatedly to cycle through the water options:
Cold  Cold & Hot  Hot  Cold
setting up your washer _11 setting up your washer _11
2013-01-29 2013-01-29 2:42:35 2:42:35