Convection Motor Removal; Thermal Cut-Out(Convection) Removal - Midea EM048K6DMP Service Manual

Convection M M M M otor
18.
1. Disconnect the power supply cord, remove oven
from wall, then remove outer case.
2. Open the door and block it open.
3. Discharge high voltage capacitor.
4. Disconnect the wire lead from convection motor.
5. Remove the belt.
6. Remove the screws
connector to the main wind guide.
7. Remove t he screws
cavity.
8. Remove t he screws
motor bracket.
9. Remove one nut holding pulley to the motor.
10. The convection motor is now free.
Removal
holding motor bracket
holding motor bracket to
holding the motor to the
Thermal Cut-Out (Convection) Removal
19.
1. Disconnect the power supply cord, remove oven
from wall, then remove outer case.
2. Open the door and block it open.
3. Discharge high voltage capacitor.
4. Disconnect the wire lead from thermal cut-out.
5. Releast the thermal cut-out from the convection
assembly.
6. Now,the thermal cut-out is free.
8