Locating And Mounting The Unit - vanEE AI Series User's And Installer's Manual

2.1 L M
OCATING AND OUNTING THE
Suspended to the joists or trusts:
• Slightly bend the brackets on the unit to insert the provided chains.
• Hang the unit to the joists using the provided chains. Springs are not required.
• Always make sure that the unit is no more than 1/4" off level.
OR
Wall mounted:
• Choose the appropriate location(s) for the mounting brackets
(see illustration below) according to stud(s) position.
• Insert the provided brackets under the unit frame (see illustration
hereafter).
• Fix the bracket using the screw no. 8 x 3/8".
• Using the 4 no. 8 x 1½" screws provided, secure the unit to the wall
making sure that the 4 screws engage into a stud.
• Always make sure that the unit is no more than 1/4" off level.
INSTALLATION WITH 2 BRACKETS
VD0486
U ( ' )
NIT CONT D
VD0488
INSTALLATION WITH 4 BRACKETS
VD0487
5
VD0485