Bosch SHE3AEM6N Use And Care Manual page 29

Hide thumbs Also See for SHE3AEM6N:
Table of Contents

Advertisement

Issue
There are removable streaks on
glasses, glassware with a metallic
appearance and silverware.
Irreversible clouding of glassware.
Detergent residue is present in the
detergent dispenser or the tab
collecting tray.
Excessive formation of foam
occurs.
Connection to home network is not
established.
WLAN display is flashing.
Home Connect cannot be
implemented correctly.
Refill indicator for rinse aid lights
up.
Refill indicator for rinse aid does
not light up.
Cause and troubleshooting
Items of dishware are blocking the dispenser lid.
Do not place dishware or fragrance dispensers in the tab collecting tray.
2.
Dishware has been precleaned too intensively. Then the sensors choose a lighter
cycle. Stubborn remnants cannot be entirely removed.
Only remove large remnants of food and do not pre-rinse dishware.
Glasses are not dishwasher-proof, only suitable for dishwashers.
Use dishwasher-proof glasses.
Glasses are usually only suitable for cleaning in a dishwasher, i.e. long-term
wear or long-term changes must be expected.
Avoid a lengthy steam phase (standing time after wash cycle ends).
Use a program with a lower temperature.
Use detergent with a glass protection component.
Spray arms were blocked by dishware so detergent was not rinsed out.
Check that the spray arms are not blocked and can rotate freely.
Detergent dispenser was damp when detergent was added.
Only add detergent to the detergent dispenser when dry.
Hand soap got in the rinse aid dispenser.
Immediately add rinse aid to the dispenser.
→  "Adding rinse aid", Page 12
Rinse aid has been spilled.
Remove the rinse aid with a cloth.
Detergent or machine care product used causes excessive foaming.
Change the brand of detergent.
WLAN on router is not active.
Check the wireless network connection of your router.
Connection to home network is not available.
Activate the wireless network connection on your router.
Home Connect set incorrectly.
Please consult the documents supplied for Home Connect®.
There is a technical error.
Please consult the information on support in the documents supplied for
Home Connect®.
No rinse aid.
Add Rinse aid →  Page 12 .
1.
Set the amount of rinse aid to be dispensed.
2.
→  "Setting the amount of rinse aid", Page 13
Rinse aid system is switched off.
Set the amount of rinse aid.
→  "Setting the amount of rinse aid", Page 13
Troubleshooting en-us
29

Advertisement

Table of Contents
loading

Table of Contents