Remove The Memory Module Shielding - Lenovo V17 Gen 2 Hardware Maintenance Manual

Screw specifications
M2 x L6
M2 x L4
Go to
https://support.lenovo.com/partslookup
replacement part:
Lower case

Remove the memory module shielding

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 6. Disconnect the battery pack cable
Step 2. Remove the memory module shielding.
Number of screws
6
4
to look up the Lenovo part numbers of the following
.
Chapter 4 Removing a FRU or CRU
33