Changing Wiper Blades - Honda CR-V 2018 Owner's Manual

MAINTENANCE

Changing Wiper Blades

Dirty wiper blades may leave streaks across the windshield. Cleaning them with a paper
towel or soft cloth and wiper fluid often improves their performance. If the wiper blade
rubber has deteriorated, you should change the wiper blades.
Changing the Front Wiper Blade Rubber
n
1. Lift the driver side wiper arm first, then the
passenger side.
2. Press and hold the tab, then slide the holder off
the wiper arm.
3. Slide the wiper blade out from its holder by pulling
the tabbed end out.
4. Slide the new wiper blade onto the holder from the
bottom end. The tab on the holder should fit in the
indent of the wiper blade.
5. Attach the wiper holder to the wiper arm until the
lock tab clicks into place.
6. Lower the passenger side wiper arm first, then the
driver side.
NOTICE
Avoid dropping the wiper arm, as it may damage the windshield.
152 |
n
Tab
Tab
Tab
Tab
Tab
Blade
Blade
Blade
Blade
Blade
End Cap At
End Cap At
End Cap At The Bottom
The Bottom
End Cap At
The Bottom
End Cap At
The Bottom
The Bottom
Blade
Blade
Blade
Blade
Blade
Holder
Holder
Holder
Holder
Holder
Blade
Blade
Blade
Blade
Blade
Holder
Holder
Holder
Holder
Holder
Cap
Cap
Cap
Cap
Cap
Changing the Rear Wiper Blade Rubber
1. Lift the wiper arm off the window.
2. Pivot the wiper blade holder until it releases from
the wiper arm.
3. Slide the blade out of the holder.
4. Remove the retainers from the blade and mount it
to a new rubber blade.
5. Slide the new wiper blade onto the holder. Make
sure it is engaged correctly, then install the wiper
blade holder onto the wiper arm.
MAINTENANCE
Wiper Arm
Blade
Retainer
Holder
| 153