Honda CR-V 2018 Owner's Manual page 61

DRIVING
Adjusting the Following Interval
n
Press the INTERVAL button to change the following
interval. Each time you press the button, the following-
interval setting cycles through short, middle, long, and
extra long.
Interval Short Middle Long
Approx.
Gap 1.1 1.5 2.1
(seconds)
Switching to Standard Cruise Control
n
Press and hold the Interval button.
Cruise mode appears in the Driver Information Interface. Press and hold the button
again to switch back to ACC.
Turning off ACC
n
Press the MAIN button to turn off ACC. The ACC indicator will shut off.
114 |
Extra Long
2.8
When in Operation
n
If a vehicle is detected ahead of you when ACC is turned on, the system maintains,
accelerates, or decelerates your vehicle's set speed to keep the vehicle's set
following interval from the vehicle ahead.
If a vehicle detected ahead of you slows down
abruptly, or if another vehicle cuts in front of you,
a beep sounds and BRAKE appears on the Driver
Information Interface to alert you.
When a vehicle detected ahead is within range and
stops, your vehicle also stops. The Stopped message
appears on the Driver Information Interface.
When the vehicle ahead of you starts again, the vehicle icon on the Driver
Information Interface blinks. Press the RES/+ button or the -/SET button, or press the
accelerator pedal to resume the prior set speed.
Canceling ACC
n
Press the CANCEL or MAIN buttons, or the brake
pedal.
Certain conditions may cause ACC to cancel
automatically. When this happens, a message appears
on Driver Information Interface.
After adaptive cruise control has been canceled, you
can still resume the prior set speed by pressing the
RES/+ button.
Press the MAIN button to turn the system off.
DRIVING
Beep
| 115