Configuring The Logon Password - SMC Networks SMC8024L2 Management Manual

C
ONFIGURING THE
Manual Configuration
Web – Click System, LAN Settings. Enter the IP address, subnet mask and
gateway, then click APPLY.

Configuring the Logon Password

The administrator has write access for all parameters governing the
onboard agent. You should therefore assign a new administrator password
as soon as possible, and store it in a safe place.
Field Attributes
• Password – Specifies the user password.
(Range: 1-16 characters plain text, case sensitive)
Note:
18
S
WITCH
Figure 6 LAN Settings
If, at any point, you cannot remember the password, you can
restore the original settings by following the procedure described
in the "Troubleshooting" section.