Troy-Bilt 49MRBESY966 Operator's Manual page 5

FCC STATEMENT
CAUTION:
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
WHILE OPERATING
• Keep hair, face, hands, feet and all other body parts away from
moving parts and openings. Do not touch or try to stop moving
parts.
• Always turn the unit off when it is not in use or when carrying the
unit from one location to another.
• Before setting the unit down, always turn it off and wait for all
moving parts to come to a complete stop.
This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's
manual for complete safety, assembly, operating and maintenance and repair information.
SYMBOL MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning or caution. May be used in
conjunction with other symbols or pictographs.
• READ OPERATOR'S MANUAL
WARNING:
manual(s) and follow all warnings and safety
instructions. Failure to do so can result in serious
injury to the operator and/or bystanders.
Changes or modifications not
• SAFETY & INTERNATIONAL SYMBOLS •
Read the operator's
OTHER SAFETY WARNINGS
• Do not attempt to repair the unit; there are no user-serviceable
parts inside. All service should be performed by an authorized
service center.
• Do not use the unit if it is not working correctly, has been
dropped, damaged, left outdoors or dropped into water. Have the
unit serviced by an authorized service center.
• Never remove, modify or make inoperative any safety device
furnished with the unit.
• Before inspecting, cleaning, storing or transporting the unit:
1. Stop the motor. Refer to the Operation section.
2. Wait for all moving parts to stop.
3. Allow the unit to cool.
• Secure the unit while transporting.
• Keep the unit dry and clean (free from debris, oil and grease).
Clean the unit after each use. Refer to Cleaning and Storage.
• Keep these instructions. Refer to them often and use them to
instruct other users. If you loan this unit to others, also loan
them these instructions.
SAVE THESE INSTRUCTIONS
SYMBOL MEANING
V
• VOLTS - Voltage
A
• AMPERES - Current
Hz
• HERTZ - Frequency (cycles per second)
AC
• ALTERNATING CURRENT - Type of current
• DIRECT CURRENT - Type of current
or DC
5