Table of Contents
Advertisement
I N S T A L L A T I O N G U I D E
1. Examine the oven after unpacking.
Unpack the oven, remove all packaging material and examine the oven for any damage such as dents on the
interior or exterior of the oven, broken door latches, cracks in the door, or a door that is not lined up correctly. If
there is any damage, do not operate the oven and notify your dealer immediately.
2. Checking the parts
Carefully unpack your microwave oven, and make sure you've received all the parts shown below. If your
microwave oven was damaged during shipping, or if you do not have all the parts, contact the SHARP Call Center.
Image
Top Cabinet
Top Cabinet Template
Template
Wall Template
3. Location
• The installation of this appliance must be performed by a qualified technician or service company.
Failing to have a qualified technician install the oven may result in electric shock, fire, an explosion, problems
with the product, or injury.
• Do not install this appliance in a humid, oily, or dusty location, or in a location exposed to direct sunlight or water
(rain drops).
• Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord, or
loose wall socket.
• Do not mount over a sink.
• Do not stand on top of the microwave or place objects (such as laundry, oven covers, lighted candles, lighted
cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
This may result in electric shock, fire, problems with the product, or injury.
4. Power supply.
• Check your local power source.
This microwave oven requires a current of approximately 14 amperes, 120Volts, 60Hz and a grounded outlet.
a) A short power-supply cord is provided to reduce the risks of the user becoming entangled in or tripping over a
longer cord.
b) Longer cord sets or extension cords are available and may be used if care is exercised in their use.
c) If a long cord or extension cord is used:
- The marked electrical rating of the cord set or extension cord should be at least as great as the electrical
rating of the oven.
- The extension cord must be a grounding type 3-wire cord.
- The longer cord should be arranged so that it will not drape the table top or counter where it can be pulled on
by children or tripped over unintentionally.
Part & Description
Hardware Kit
(Screws)
Damper
(Exhaust Adapter)
Mounting Plate
Rear Wall Template
Q'ty
Image
Installation
1
Manual
Operation
1
Manual
1
1
1
7
Part & Description
Installation Manual
Operation Manual
Guide Roller Ring
Grease Filters
Model # RK-235
Glass Turntable
Charcoal Filter s
Model # RK-233
Q'ty
1
1
1
4
1
2
Advertisement
Table of Contents
