Subscribe to Our Youtube Channel
Related Manuals for OSD Audio DAC XA100
Summary of Contents for OSD Audio DAC XA100
- Page 1 DIGITAL STEREO DAC XA100 A M P L I F I E R DAC-X A100 24/192 CLASS AB DIGITAL STEREO MULTI-SOURCE POWER AMPLIFIER USER GUIDE...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS Important Safety Instructions TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL — Read all the safety and operating instructions before operating this product. Retain Instructions — Retain safety and operating instructions for future reference. —... - Page 3 SAFETY INSTRUCTIONS — Do not attempt to repair or service this product yourself. Opening or removing covers may expose service personnel under the following conditions: a) If the power-supply cord or plug is damaged. If liquid has been spilled into the product. c) If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions.
-
Page 4: Rear Panel
REAR PANEL 400W 3.3A MAX 120 VAC~60Hz DAC-XA100 24/192 HD AUDIO The DAC-X-A100 Main Input consists audio inputs. The Main Output also consists of stereo RCA connector. adjusted from -12dB to + 12dB. The Interrupting Inputs consists of stereo RCA Jacks, plus the USB Digital Audio input. This input Select Stereo mode can be used if a second source is desired and takes over for connecting one or two pair of loudspeakers, when set to... -
Page 5: Front Panel
FRONT PANEL DAC-X A100 The front-panel Power Switch turns the You can select Speakers A, XA100 on or off. A red LED indicates connection to AC power Speakers B, or Both for playback. while in standby mode and turns green indicating audio signal is present. - Page 6 SETUP Set Rear Controls First Mode – Either Stereo or Bridge Do you want to power the amp via the front panel on/off switch or use a 12-volt trigger or have the amp turn on when a signal is present? Select your choice on the rear panel. If you choose Trigger or Auto, the front panel on/off switch must be ON.
-
Page 7: Warranty
WARRANTY must accompany all claims. During the warranty period OSD Audio will replace any defective part and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If necessary, repairs must be... - Page 8 OSD Audio | Brea, CA. | osdaudio.com...
Need help?
Do you have a question about the DAC XA100 and is the answer not in the manual?
Questions and answers