Camera Introduction Set up the Camera Set up the Camera Using a Smartphone Step 1 Scan to download the Reolink App from the App Store or Google Play store. Daylight Sensor Built-in PIR Sensor Built-in Mic Speaker Reset Hole Micro SD Card Slot reset hole and the SD card slot.
Charge the Camera Step 3 Launch the Reolink App, click the “ ” button in the top right corner to add the camera. It’s recommend to fully charge the battery before mounting the camera. Devices Cloud Charge the battery with a power adapter. Charge the battery with the Reolink Solar Panel (not included) (Not included if you only purchase the camera).
Install the Camera Mount the Camera • range of the PIR motion sensor. • For better motion detection performance, please install the camera angularly. to detect motion. Drill holes in accordance with the Install the antenna to the camera. mounting hole template and screw the camera bracket to the wall.
Page 6
Mount the Camera to Ceiling Install the mount base to the ceiling. Align the camera with the bracket and turn the camera unit clockwise to lock it in position. Align the white hole on the camera top with the white hollow screw on the bracket. Use a wrench English English...
Safety Instructions of Battery Usage Install the Camera with Loop Strap You are allowed to strap the camera to a with both the security mount and ceiling bracket. plate and you are good to go. tips on how to extend the battery life in this post: Reolink solar panel.
Troubleshooting FCC Compliance Statements CE Declaration of Conformity lighting. Camera is Not Powering On If these won’t work, contact Reolink Support. If your camera is not powering on, please try the following solutions: interference that may cause undesired • Make sure the power switch is turned on. operation.
Page 9
Note: Operation of 5150-5250 MHz is restricted to (EIRP:13.87dBm) (Only for EU/UK)5.8GHz: 5745MHz-5825MHz (EIRP:13.98dBm) (Only for indoor use only in Canada. including interference that may cause unde EU/UK) Le fonctionnement de 5150-5250 MHz est limité à une utilisation en intérieur uniquement. is connected.
Page 10
v. pour les dispositifs à antenne (s) détachable Statement Technical Support The user manual for LE-LAN devices shall (s), le gain d'antenne maximal autorisé pour contain instructions related to the restrictions les dispositifs dans les bandes 5250-5350 MHz This radio transmitter [26839-2302A] has mentioned in the above sections, namely that: et 5470-5725 MHz doit être tel que been approved by Innovation, Science and...
Need help?
Do you have a question about the Argus PT Ultra and is the answer not in the manual?
Questions and answers