Related Manuals for RedLINK RLC-523WA
Summary of Contents for RedLINK RLC-523WA
- Page 1 January 2021 QSG1_A_EN RLC-523WA Quick Start Guide @ReolinkTech https://reolink.com 58.03.001.0177...
-
Page 2: What's In The Box
What’s in the Box Contents What's in the Box Camera Introduction Connection Diagram Set up the Camera Camera Waterproof Lid Antennas * Mount the Camera Troubleshooting Specifications 4.5m Power Mounting Notification of Compliance Ethernet Cable Extension Cable * Template Power Quick Surveillance Pack... -
Page 3: Camera Introduction
Connection Diagram Camera Introduction Before initial setup, follow the steps below to connect your camera. Antenna 1. Connect the camera to a LAN port on your router with an Ethernet cable. Speaker 2. Use the power adapter provided to power on the camera. SD Card Slot Metal Aluminum Case Built-in Mic... -
Page 4: Set Up The Camera
Mount the Camera Set up the Camera Download and launch the Reolink App or Client software and follow the Installation Tips onscreen instructions to finish initial setup. • Do not face the camera towards any light sources. • Do not point the camera towards a glass window. Or, it may result in poor image performance due to the window glare from infrared LEDs, Available on the •... - Page 5 Mount the Camera to the Wall Drill holes in accordance with the mounting hole template. NOTE: Use the drywall anchors included in the package if needed. To adjust the camera direction, you may control the camera to pan and tilt via Reolink App or Client. Install the mount base with screws included in the package.
-
Page 6: Troubleshooting
Troubleshooting Pan&Tilt Is Not Working If the pan&tilt is not working , please try the following solutions: Camera Is Not Powering on • Power cycle the camera and see if it will automatically pan/tilt. If not, the camera may be faulty. If yes, please refer to the further steps. If your camera is not powering on, please try the following solutions: •... -
Page 7: Notification Of Compliance
Size: Φ136 x 201mm of the following measures: Weight: 1.8kg • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. For more specifications, visit https://reolink.com • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Page 8 recycle it responsibly to promote the sustainable reuse of material ISED Statements resources. To return your used device, please use the return and This device contains licence-exempt transmitter(s)/receiver(s) that collection systems or contact the retailer where the product was comply with Innovation, Science and Economic Development Canada’s purchased.
- Page 9 This radio transmitter IC: 26839-2201F has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly Operation of this device is restricted to indoor use only.
Need help?
Do you have a question about the RLC-523WA and is the answer not in the manual?
Questions and answers