Subscribe to Our Youtube Channel
Related Manuals for ROBAND AUSTHEAT AF812
Summary of Contents for ROBAND AUSTHEAT AF812
- Page 1 Manufactured By Instruction Manual FREE STANDING FRYERS AF812, AF812R, Version 7 AF813, AF813R AF822 Version 6...
-
Page 2: Table Of Contents
CONTENTS PRODUCT FEATURES Product Features Swing Up Ultra-Durable Stainless Steel ▪ Specifications Elements Parts Included Easy Clean Tank with Lockable 1” Drain ▪ Safety Instructions Adjustable Legs & Rear Castors ▪ Cleaning & Maintenance Installation Digital LED Temperature Display ▪ Operation Fish Plate &... -
Page 3: Safety Instructions
TO EXTRACT ELEMENTS FROM THE TANK This machine contains no user-serviceable parts. • turn off machine and wait until cool Roband Australia®, one of our agents, or a • remove fish plate using fish plate lifter similarly qualified person(s) should carry out (located inside the door) repairs. -
Page 4: Installation
WARNING: Do not power on the unit without oil Regardless of the situation, Roband Australia in the tank. recommends a well-ventilated air gap of not less than 100mm be maintained. If the machine is... -
Page 5: Operation
OIL TYPES The danger of surge boiling also exists if over- wet or too large a load is used EXTRA VIRGIN OLIVE OIL The flash point of Extra Virgin Olive Oil is Refer to the specifications page for the volume considerably lower than the more refined Olive of oil required for your particular model. - Page 6 The secondary thermostat can be used 4. Rotate the primary thermostat knob to select the desired cooking temperature. as a redundant control thermostat if the Roband Australia recommends a setting of primary thermostat fails. between 170° and 180°C. 4. MELT SWITCH When the machine is heating, the amber pilot •...
- Page 7 temperature the amber pilot light will be • Cooking elements are not sufficiently extinguished. submerged in oil/ exposed to air. The thermostat will then continue to cycle on If any of these conditions occur, one or both and off, maintaining the set temperature. The thermal cut-outs will trip, cutting power to the amber pilot light will cycle on and off with the elements.
-
Page 8: Troubleshooting
When tripped, a red button on the device will This should be attended to by qualified protrude out from the panel where it is located. electrical personnel. If the thermal cut-out has tripped, it indicates If the thermal cut-out trips again after following that there is an underlying problem that has the above procedure, it indicates that there is a caused the oil to reach a dangerous... -
Page 9: Spare Parts
Switch - Rotary, Mains Isolator - 4 pole 40A EC0272 MC0691 Valve - Drain, 1" ball with lockable lever per pole MC0846 Knob & Spring-Roband Satin Finish-6mm 0° Element - 4800W 230V (For 15kW HC0149 Thermometer Probe (K Type Machines & 813R) MS0355 Thermocouple) , Washer &... -
Page 10: Circuit Diagram
CIRCUIT DIAGRAM MODELS: AF812, AF812R, AF813, AF813R... - Page 11 MODELS: AF822...
-
Page 12: Warranty
Tubular Heating Elements is not a warranty fault. Roband or any subsidiary company or Agent shall not be liable for loss of profit or damage to other equipment and property except where it is in breach of the guarantees provided in accordance with applicable legislation.
Need help?
Do you have a question about the AUSTHEAT AF812 and is the answer not in the manual?
Questions and answers