Using Your Refrigerator; Setting The Controls; Airflow - Kenmore 795.7160 Series Use & Care Manual

SETTING THE CONTROLS

Temperature
• Your refrigerator has a control pad above the
refrigerator compartment that lets you regulate the
temperature in the freezer and refrigerator
compartments.
• Initially set the refrigerator control at 37°F (3°C) and
the freezer control at 0°F (–18°C). Leave it at these
settings for 24 hours (one day) to stabilize. Adjust
the compartment temperature as desired.
• Refrigerator Temp Control: 33°F to 46°F
(0°C to 8°C) The lower the number setting, the
colder the refrigerator compartment will become.
• Freezer Temp Control: -6°F to 8°F
(-21°C to -13°C) The lower the number setting, the
colder the freezer compartment will become.
Ultra Ice
• When you press the Ultra Ice button, the graphic
[ ] will light up in the display and it continues
for 24 hours. It will automatically shut off after 24
hours have passed. You can stop this function
manually by pressing the button one more time.
• This function increases both icemaking and
freezing capabilities.
Door Alarm
• When power is connected to the refrigerator,
the door alarm is initially set to
the door alarm display will show the
• When either the refrigerator or the freezer door is
left open for more than 60 seconds, the alarm will
sound to let you know the door is open.
• When you close the door, the door alarm will stop.
• If you want to disable the door alarm function,
press the button and the door alarm display
will switch to (OFF).

USING YOUR REFRIGERATOR

ON and
(ON).
18
w w CAUTION
Demo Mode (Retail Stores)
The Demo Mode disables all cooling in the refrigerator
and freezer sections to conserve energy while on
display in a retail store.
1. To Activate:
With the refrigerator door opened, press and hold the
Refrigerator Temp and Ultra Ice buttons at the same
time for 5 seconds. The control panel will beep to
confirm that the Demo Mode is activated.
2. To Deactivate:
With the refrigerator door opened, press and hold the
Refrigerator Temp and Ultra Ice buttons at the same
time for 5 seconds. The control panel will beep to
confirm the Demo Mode is deactivated.

AIRFLOW

In order to ensure proper temperatures, air must flow
between the refrigerator and freezer sections. The
arrows in the figure indicates air vent locations and
the direction of airflow.
Do not block any of the cool air vents with food
packages. If the vents are blocked, airflow will be
interrupted. This may result in temperature and
moisture problems.
If you add a large amount of food, the refrigerator will
take longer to cool it.
At initial start-up allow your refrigerator to run for 2 or
3 hours before placing food in it.