Tenda P1001P User Manual page 6

LED Status
Blinking
Off
Solid
Powerline
Blinking
Off
Solid
LAN
Blinking
Button & Interface
LAN: For connecting to the Internet, a PC, or other network devices via an Ethernet cable.
Reset/Pair: Two buttons in one, the Pair button and the Reset button.
Pair—Press and hold it for about 1 second (
adapters.
Reset—Press and hold it for about 8 seconds and then release it,
and the adapter will be restored to factory default.
AC Socket: The AC Socket can reduce the electrical noise that might affect the Powerline performance. Plugging
a nearby PC or other device into the AC Socket improves performance.
3
Description
The device is under Power Saving Mode when powered on for about 300
seconds, and there is no link on the LAN port.
The adapter has not paired with other Powerline adapter(s).
The adapter is connected to a Powerline network.
The adapter is sending or receiving data.
There is no Ethernet connection.
The LAN port is well connected, but no data is being transmitted.
Data is being transmitted.
LED indicator starts blinking) to pair with other Powerline
LED indicator will blink 3 times regularly