Procedure:
1. Press and hold the Pair button on Adapter 1 for 1 second and then release it. The
LED on Adapter 1 will
start blinking.
2. Within 2 minutes upon releasing Adapter 1's Pair button, press and hold the Pair button on Adapter 2 for 1
second and then release it. The
LED on Adapter 2 will start blinking.
3. Observe the two adapters' LED status. If both
LEDs on the two adapters display solid, it indicates that an
encrypted private Powerline network is successfully created between Adapter 1 and Adapter 2.
When the two adapters create an encrypted private Powerline network, their network name will be changed into a
same one, which is not HomePlugAV, and if you want to add more Powerline adapters into your Powerline
network, you need to use pair button.
16