To Extend Powerline Network - Tenda P1001P User Manual

To Extend Powerline Network

For example in the figure above, Adapter 1 and Adapter 2 have formed a network, say Network1, and you're
trying to add Adapter 3 to this network, do as follows:

Press the Pair button on Adapter 1 (or Adapter 2) for 1 second and then release it. The LED starts blinking,
which indicates that it is waiting for another Powerline adapter to join Network1.

Within 2 minutes upon releasing Adapter 1's (or Adapter 2's) Pair button, press the Pair button on Adapter 3
for 1 second and then release it. The LED on Adapter 3 starts blinking, which indicates that it is negotiating
with another adapter.
17