Observe the three adapters' LED status. If all
LEDs on three adapters display solid, it indicates Adapter 3
has connected to Network1 successfully.
To Disconnect a Powerline Adapter
To remove one Powerline Adapter from one Powerline Network, what you need to do is to reset the Powerline
Adapter to factory default.
As displayed above, Adapter 1, 2 and 3 have formed a private Powerline network (Network1). And now you want
to disconnect Adapter 3 from Network1. Do as follows.
Press the Pair button on Adapter 3 for at least 6 seconds and then release it. The
LED on Adapter 3 will blink
three times, which indicates Adapter 3 will exit from Network 1.
18