Table of Contents
Advertisement
RAID Configuration
The introduction of RAID levels and types are as below:
RAID 0
breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly
improves I/O performance.
RAID 1
provides data redundancy by mirroring data between the hard drives and
provides enhanced read performance.
RAID 10 uses four hard drives to create a combination of RAID 0 and 1 by forming a
RAID 0 array from two RAID 1 arrays.
RAID level comparison
Minimum # drives
Data protection
Read performance
Write performance
Capacity utilization
⚠
Important
All the information/ volumes/ pictures listed in your system might differ from the
illustrations in this appendix.
AMD RAID User Guide
62
RAID Configuration
RAID 0
2
None
Excellent
Excellent
100%
If you'd like to know more instructions on how to set up AMD RAID,
please refer to
http://download.msi.com/manual/mb/AMDRAID.pdf
or scan the QR code to access.
RAID 1
2
Excellent
OK
Good
50%
RAID 10
4
Excellent
OK
Good
50%
Advertisement
Table of Contents
