Table of Contents
Advertisement
Device Selection - allows you to select a audio output source to change the related
y
options. The check sign indicates the devices as default.
Application Enhancement - the array of options will provide you a complete
y
guidance of anticipated sound effect for both output and input device.
Main Volume - controls the volume or balance the right/left side of the speakers
y
that you plugged in front or rear panel by adjust the bar.
Profiles - toggles between profiles.
y
Advanced Settings - provides the mechanism to deal with 2 independent audio
y
streams.
Jack Status - depicts all render and capture devices currently connected with your
y
computer.
Connector Settings - configures the connection settings.
y
Audio 7.1-channel Configuration
To configure 7.1-channel audio, you have to connect front audio I/O module to JAUD1
connector and follow the below steps.
1.
Click on the Advanced Settings to open the dialog below.
2.
Select Mute the rear output device, when a front headphone plugged in.
3.
Plug your speakers to audio jacks on rear and front I/O panel. When you plug into
a device at an audio jack, a dialogue window will pop up asking you which device is
current connected.
21
Rear I/O Panel
Advertisement
Table of Contents
