Download Print this page

Motorola XPR Series Quick Reference Card

Digital mobile radio

Advertisement

Quick Links

m
XPR Series Digital Mobile
Radios
Quick Reference Card
Radio Controls
3
1
5
4
2
CH+
CH -
P 1
P 3
OK
MENU
BACK
P 2
P 4
7
10
12
9
8
11
Record your radio's programmable button
functions in the blanks provided. SP represents
Short Press, LP represents Long Press.
1
On/Off Button
2
Volume Knob
Front Button P1 (Programmable)
3
SP: _____________ LP: _____________
© 2006, 2007 by Motorola, Inc. All Rights Reserved. 04/07
1301 E. Algonquin Rd., Schaumburg, IL 60196-1078, U.S.A.
Printed in the U.S.A.
4
Display
5
Channel Rocker
6
Speaker
Front Button P3 (Programmable)
7
SP: _____________ LP: _____________
Front Button P4 (Programmable)
6
8
SP: _____________ LP: _____________
9
Menu Navigation Buttons
Front Button P2 (Programmable)
10
SP: _____________ LP: _____________
11
Accessory Connector
12
LED Indicators
Menu Navigation Buttons
A
C
B
A
Left/Right Navigation Buttons
B
Menu Button
C
OK Button
D
Back/Home Button
Display Icons
The following are the icons that appear on the
radio's display.
The number of bars displayed
represents the radio signal strength.
Four bars indicates the strongest signal.
This icon is only displayed while
receiving.
Radio is currently set at Low Power (L)
or
or High Power (H).
Radio is in Emergency mode.
Selected channel is being monitored.
Scan feature is activated.
Radio recognizes activity on the
channel/group designated as Priority 1
(if
is blinking) or as Priority 2 (if
steady).
D
is
*6880309T08*
6880309T08-B
English

Advertisement

loading

Summary of Contents for Motorola XPR Series

  • Page 1 Priority 2 (if steady). Front Button P1 (Programmable) *6880309T08* SP: _____________ LP: _____________ © 2006, 2007 by Motorola, Inc. All Rights Reserved. 04/07 6880309T08-B 1301 E. Algonquin Rd., Schaumburg, IL 60196-1078, U.S.A. Printed in the U.S.A. English...
  • Page 2 Solid yellow – Radio is receiving a request for a The display shows <Zone> Selected In the absence of a repeater, radio is Private Call, or monitoring a channel. momentarily and returns to the selected zone currently configured for direct radio to screen.
  • Page 3 Release the PTT button to listen. Release the PTT button to listen. Scanning Channels When the target radio responds, the green If there is no voice activity for a Press the preprogrammed Scan button to turn scan on or off. LED blinks.
  • Page 4 If the Call Alert acknowledgement is received, If the message is sent successfully, a tone The display shows Text Message: <Group/ a tone sounds and the display shows Call sounds and the display shows Message Subscriber Alias or ID>. Alert Successful. Sent.