Table of Contents
Advertisement
SETTING END OF COOKING TIME / DELAYED START
IMPORTANT: the start delayed setting is not available for the following functions: FAST
PREHEATING, BREAD/PIZZA.
N.B.: with this setting, the selected temperature is reached in a more gradual way, so cooking times
will be slightly longer than stated in the cooking table.
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and
59 minutes. This can only be done once cooking time has been set.
After setting cooking time, the display shows the end of cooking time (for example 15:45) and the
symbol
flashes.
To delay the end of cooking time, and thus also the cooking start time, proceed as follows:
1.
Turn the "Browse" knob to display the time you wish cooking to end (for example 16:00).
2.
Confirm the selected value by pressing button
indicating that the setting has been made correctly.
3.
The oven will automatically delay the start of cooking so as to finish cooking at the set time.
At any time, however, set values (temperature, grill setting, cooking time) can be changed using
button
to go back, followed by the "Browse" knob to change values and button
TIMER
This function can be used only with the oven switched off and is useful, for example, for monitoring the
cooking time of pasta. The maximum time which can be set is 23 hours and 59 minutes.
1.
With the "Functions" knob at zero, turn the "Browse" knob to display the desired time.
2.
Press button
to start the countdown. When the set time has elapsed, the display will show "END"
and an acoustic signal will sound. To mute the acoustic signal, press button
appears on the display).
SELECTING SPECIAL FUNCTIONS
Turn the "Functions" knob indicator to the symbol
To browse, select and start one of these functions, proceed as follows:
1.
Turn the "Functions" knob to symbol
corresponding symbol.
2.
Turn the "Browse" knob to scroll the list of functions: DEFROST, KEEP WARM, RISING, ECO FORCED AIR.
3.
Press button
to confirm.
BROWNING
At the end of cooking, with certain functions, the display indicates the possibility of browning.
This function can only be used when cooking time has been set.
At the end of cooking time, the display shows: "PRESS
a 5 minute browning cycle. This function can be selected consecutively a maximum of twice.
: the two dots of end of cooking time flash,
to access a submenu containing four special functions.
: the display shows "DEFROST" along with this function's
TO BROWN" . Press button
EN11
to confirm.
(the time of day
, and the oven starts
Advertisement
Table of Contents
