How To Operate Your Ceiling Fan - Fanimation AIREFLEX LP7675 Series Manual

How to Assemble Your Light Kit (Continued)
6. Secure the glass to light kit by twisting in a
clockwise direction. Twist the glass gradually
snaps on to the light kit.
(Figure 6)
1. IMPORTANT: Using a full range dimmer switch (not
included) to control fan speed will damage the fan. To
reduce the risk of fire or electrical shock, do not use a
full range dimmer switch to control the fan speed.
(Figure 1)
2. Restore electrical power to the outlet box by turning
the electricity on at the main fuse box. (Figure 2)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan until the blades are in place. Noise and fan
damage could result.
WARNING
Do not operate this fan with a variable (Rheostat) wall
controller or dimmer switch. Doing so could result in
damage to the ceiling fan's remote control unit.
3. Remove the battery cover from remote control by
screwdriver and retain the screw for later. (Figure 3)
Do not over-tighten.

How to Operate Your Ceiling Fan

until it
14
Figure 6
For illustrative purposes only-not
intended to cover all types of controls
Figure 1
Figure 2
Figure 3
Light Kit
Glass
MAIN FUSE BOX